Furnace Repair Spokane, WA
No heat? We answer 24/7 and offer same-day emergency furnace repair, with upfront pricing and no extra charge after hours. Every major brand, across Spokane, Spokane Valley and North Idaho.
No heat? We answer 24/7 and offer same-day emergency furnace repair across Spokane and North Idaho.
- Veteran and Locally-Owned since 1988
- Free System Inspection
- Financing Available
- Same-Day Scheduling
- Veteran and Locally-Owned since 1988
- Free System Inspection
- Financing Available
- Same-Day Scheduling
Furnace Repair Spokane
Fast, Honest Furnace Repair for Spokane-Area Homes
When your furnace quits in a Spokane winter, you need heat today, not next week. Cline’s has repaired gas and electric furnaces across Spokane, Spokane Valley and North Idaho since 1988.
We find the real cause before recommending anything, show you what failed, and give you an upfront price before work begins. And because we fix first and replace last, you won’t be pushed toward a furnace you don’t need.
24/7 Emergency Service
24/7 Emergency Furnace Repair. Same Day, Same Price.
Spokane cold snaps don’t wait for business hours. When your furnace quits at 10 p.m. or on a holiday weekend, call us. We answer 24/7, handle emergency repairs the same day, and charge the same rate at 2 a.m. as at 2 p.m.
Call right away if:
- Your furnace stopped heating and the house is cooling fast
- It won't start, or shuts off after a few minutes
- You hear loud banging, grinding or electrical buzzing
- You smell burning or hot electrical odors
Smell gas or hear a CO alarm?
Get everyone outside right away. From a safe distance, call 911, then Avista at (800) 227-9187. Don’t flip switches on your way out. Once the utility says your home is safe, call us.
Know the Signs
Common Furnace Problems We Fix in Spokane
Furnace Won't Turn On
The thermostat calls for heat but nothing happens, or the blower runs and the burners never light. It's usually a cracked igniter, a failed control board or a tripped safety switch. We test the full startup sequence, replace the failed part and confirm a complete heating cycle.
Furnace Blowing Cold Air
Often a dirty flame sensor shuts the burners off seconds after they light. A limit switch tripped by a clogged filter or a blocked condensate drain can do the same. We clean or replace the sensor, check airflow and clear the drain so it doesn't come back next week.
Short Cycling
The furnace runs a few minutes, shuts off, then starts again. That wears out parts and raises your Avista bill. We measure temperature rise and static pressure to find overheating, then test the pressure switch, flame sensor and thermostat location.
Banging, Squealing or Grinding
A bang at startup can mean delayed ignition. Squealing or grinding usually points to a worn blower or inducer motor bearing. We clean the burners, run a combustion check and replace worn motors before they fail completely.
Weak Airflow or Cold Rooms
If some rooms never warm up, a failing blower motor or capacitor, a clogged filter or a duct restriction is often to blame. We check motor amperage, capacitor readings and static pressure to pinpoint the cause.
Frozen or Blocked Vent Pipes
High-efficiency furnaces vent through PVC pipes that snow and ice can block, which locks the furnace out. We clear and inspect the venting and condensate system, then fix whatever caused the lockout.
Request Service
Request Furnace Repair
Tell us what your furnace is doing, and we’ll reach out to schedule your repair. For no heat or an emergency, calling is fastest: we answer 24/7.
- Calls answered 24/7
- Same-day emergency repairs
- No extra charge after hours
- Upfront price before work starts
How It Works
How Our Furnace Repair Works
1. Diagnose and Safety Check
Your technician watches the furnace run through a full heating cycle and checks the filter, airflow, wiring, venting and error codes. We also look for safety issues like a damaged vent pipe or a cracked heat exchanger.
2. Approve the Price, Then We Repair
You get a flat-rate price before any work starts, and it doesn’t change if the job runs long. Common repairs include igniters, flame sensors, capacitors, motors, switches and control boards.
3. Test and Confirm
We run complete heating cycles to confirm the furnace lights, stays lit, moves air and shuts down correctly. If we spot anything else, we’ll show you and let you decide.
Pricing and Options
How Much Does Furnace Repair Cost in Spokane?
The price depends on what failed. A flame sensor, igniter or capacitor is usually a smaller repair than a blower motor, inducer motor or control board, and high-efficiency furnaces use more specialized parts. What doesn’t change the price is the time of day: we charge the same at midnight on a Sunday as on a Tuesday afternoon. You’ll always approve a flat-rate price before we start.
Repair or replace? Age alone doesn’t decide it. Already have a replacement quote? We’re happy to give you a second opinion, and if replacement is the better value, see our furnace installation options.
| Repair Usually Makes Sense | Replacement Is Worth Considering | |
|---|---|---|
| Age | Under about 15 years old | 15 to 20+ years old |
| What failed | One part, like an igniter or blower motor | Repairs needed every winter |
| Safety | Heat exchanger and venting pass inspection | Cracked heat exchanger or another safety problem |
| Repair cost | A small share of a new furnace's cost | A large share of a new furnace's cost |
| Comfort and bills | Reliable, with steady bills | Bills climbing, or rooms never get warm |
Why Cline's
Why Spokane Homeowners Choose Cline's for Furnace Repair
We Fix First, Replace Last
A furnace with good years left deserves a repair, not a sales pitch. We recommend replacement only when repairs no longer make sense.
24/7 Answering, Same-Day Repair
Furnaces fail on the coldest nights, so we answer 24/7 and handle emergency repairs the same day, holidays included.
No Extra Charge After Hours
Many companies add overtime or weekend fees. We don’t. You pay the same upfront price at night, on weekends and on holidays.
Upfront, Flat-Rate Pricing
You see and approve the price before we start. The price is for the job, not the clock, so there are no surprises on your bill.
Every Brand, Every Furnace
Carrier, Bryant, Trane, Lennox, Goodman, Rheem, York and more. Gas, electric, high-efficiency and dual-fuel, no matter who installed it.
Trained, Licensed and Local
NATE-certified technicians and a Carrier Factory Authorized Dealer. Licensed in Washington (Lic. #CLINEAC76459), veteran-owned and based in Spokane Valley.
Recent Work
Recent Furnace Repairs Around Spokane
Spokane Valley, WA
No Heat: Failed Igniter
Furnace wouldn’t light on a cold morning. Replaced the cracked igniter and confirmed a full heating cycle.
Spokane, WA
Short Cycling: Dirty Flame Sensor
Furnace lit, then shut off after seconds. Cleaned the flame sensor and replaced a clogged filter.
Coeur d'Alene, ID
Weak Airflow: Blower Capacitor
Rooms stayed cold with a humming furnace. Replaced the failed capacitor and restored full airflow.
Customer Stories
What Our Customers Say
Rated 4.9 on Google by 395+ customers. Spokane homeowners have trusted Cline’s with their furnaces since 1988.
Steven and the team from Cline’s were courteous and fast. They arrived when they said they would. We appreciate their professionalism.
Ryan McKinleyOctober 3, 2026
The technician, Steven, was amazing.
Joel DumesleOctober 2, 2026
Nate was very professional and knowledgeable. His ability was above that of his duration of service. As far as the company we will have to see as this was my… read more first service call, soo far better than other.
Thomas RayOctober 1, 2026
Service Area
Furnace Repair Across Spokane County and North Idaho
From our shop at 15916 E Sprague Ave in Spokane Valley, we repair furnaces along the I-90 corridor from Spokane to Coeur d’Alene, and north to Mead, Colbert and Sandpoint.
Spokane County, WA: Spokane (South Hill, North Spokane, Five Mile, Indian Trail, Hillyard) · Spokane Valley (Greenacres, Opportunity, Veradale) · Liberty Lake · Mead · Colbert
Kootenai County, ID: Coeur d’Alene · Post Falls · Hayden
Bonner County, ID: Sandpoint
The Inland Northwest heating season runs from about October through April, and worn parts tend to fail on the coldest nights. Not sure if we cover your address? Call 509-443-6146.
Questions
Furnace Repair FAQs for Spokane Homeowners
Do you offer emergency furnace repair in Spokane?
Yes. Cline's answers calls 24/7 and provides same-day emergency furnace repair in Spokane, Spokane Valley and North Idaho, including nights, weekends and holidays. There's no extra charge for after-hours service. Call 509-443-6146 and we'll get a technician on the way.
How much does furnace repair cost in Spokane?
It depends on what failed. A flame sensor, igniter or capacitor is usually a smaller repair, while a blower motor, inducer motor or control board costs more. We diagnose the problem first and give you a flat-rate price to approve before any work begins, and the price is the same any time of day.
What should I check before calling for furnace repair?
Make sure the thermostat is set to Heat and a few degrees above room temperature, with fresh batteries. Check the furnace service switch and your breaker, and replace the filter if you can't see light through it. On high-efficiency furnaces, clear snow or ice from the white PVC vent pipes outside. If it still won't heat, call us.
Why is my furnace blowing cold air?
First, check that the thermostat fan is set to Auto, not On. If it still blows cold, the most common causes are a dirty flame sensor, a failed igniter, a limit switch tripped by a clogged filter, or a blocked condensate drain or vent pipe. A technician can test the ignition sequence to find which one it is.
Why does my furnace keep turning on and off?
That's short cycling. It's usually caused by overheating from a dirty filter or blocked vents, a faulty flame sensor or pressure switch, or a thermostat near a heat source. Short cycling wears parts out quickly and raises your energy bill, so have it checked before it turns into a bigger repair.
Is it worth repairing a 20-year-old furnace?
Sometimes. If it's a single, inexpensive part and the heat exchanger and venting are sound, a repair can make sense. Furnaces in the 15- to 20-year range that need repairs every winter, or that have a cracked heat exchanger, are usually better replaced. We'll give you an honest recommendation either way.
What should I do if I smell gas near my furnace?
Leave your home immediately with everyone inside. Don't flip switches or use anything that could spark. From a safe distance, call 911, then Avista at (800) 227-9187. Once responders say it's safe, Cline's can inspect and repair your furnace.
Do you repair furnaces installed by another company?
Yes. We repair all major brands, including Carrier, Bryant, Trane, Lennox, Goodman, Rheem and York, no matter who installed them. You don't need to be an existing Cline's customer to call for repair.
Related Services
Related Heating Services in Spokane
High-efficiency furnaces sized to your home, with written options and financing.
Furnace Down? Get Your Heat Back Today
Our “No Pressure Promise”: we fix first and replace last. If a repair is the right answer, that’s exactly what we’ll tell you. We answer 24/7 across Spokane, Spokane Valley and North Idaho.