Furnace Installation Spokane, WA
New gas and electric furnaces sized to your home and installed by NATE-certified technicians. Carrier Factory Authorized Dealer serving Spokane, Spokane Valley and North Idaho since 1988.
New gas and electric furnaces sized to your home. Carrier Factory Authorized Dealer since 1988.
- Veteran and Locally-Owned since 1988
- Free System Inspection
- Financing Available
- Same-Day Scheduling
- Veteran and Locally-Owned since 1988
- Free System Inspection
- Financing Available
- Same-Day Scheduling
Furnace Installation Spokane
New Furnace Installation, Sized for Spokane Winters
A new furnace is a 15- to 20-year decision, and the install matters as much as the equipment. A furnace that’s too big short cycles and wears out early. One that’s too small runs nonstop on the coldest January nights. Cline’s sizes every furnace to your home, not to the old unit’s label.
We fix first and replace last, so if your current furnace still has good years left, we’ll tell you. When replacement is the better value, you’ll get clear options in writing, with upfront pricing, available rebates and financing laid out before you decide.
Know the Signs
Signs It's Time to Replace Your Furnace
Not sure it’s time? We’ll give you an honest repair-or-replace recommendation. If a repair makes more sense, we’ll say so and point you to furnace repair.
It's 15 to 20+ Years Old
Most gas furnaces last about 15 to 20 years. Past that, parts get harder to find, efficiency drops and the risk of a mid-winter failure climbs.
It Needs Repairs Every Winter
One repair is normal. A new igniter, then a motor, then a control board in back-to-back seasons usually means the money is better spent on a new furnace.
Your Avista Bills Keep Climbing
Older 60% to 80% furnaces waste a lot of the gas they burn. Moving to a 90%+ AFUE furnace can noticeably cut heating costs in a long Spokane winter.
Some Rooms Never Get Warm
Uneven heat often comes from an aging blower or a furnace that was never sized right. A properly sized two-stage or variable-speed furnace evens it out.
A Cracked Heat Exchanger
A cracked heat exchanger can let carbon monoxide into your home. It's one of the most common reasons we recommend replacement over repair.
Noise, Short Cycling or Lockouts
Banging, frequent on-off cycling or repeated lockouts on an older furnace are signs that major parts are wearing out at the same time.
Request Service
Request a Furnace Estimate
Tell us about your home and current furnace, and we’ll set up a time to measure, review your options and give you pricing in writing. Want a ballpark first? Try our instant quote.
- Furnaces sized to your home
- Options and pricing in writing
- Avista rebates and financing explained
- Carrier Factory Authorized Dealer
Your Options
Furnace Options for Spokane Homes
As a Carrier Factory Authorized Dealer, we install Carrier furnaces and help you match the right one to your home, your budget and how long you plan to stay. A single-stage furnace runs at full blast every time. A two-stage furnace runs on low most of the time for quieter, more even heat. A variable-speed or modulating furnace adjusts in small steps for the most consistent comfort. Carrier’s Comfort, Performance and Infinity series cover all three.
| Standard-Efficiency Gas | High-Efficiency Gas | Electric Furnace | Dual-Fuel System | |
|---|---|---|---|---|
| Efficiency | 80% AFUE | 90% AFUE and up | Electric heat | Gas furnace plus heat pump |
| Best for | Rentals, or homes where PVC venting isn't practical | Most Spokane homes on natural gas | Homes without natural gas | Lower bills on mild days, plus summer cooling |
| Venting | Existing metal flue | PVC intake and exhaust | No flue needed | PVC, with a high-efficiency furnace |
| Avista gas furnace incentive | No | Yes, on qualifying models | Not a gas furnace | On a qualifying 90%+ furnace |
| Comfort options | Single- or two-stage | Single-stage, two-stage or variable-speed | Multi-stage heat | Two-stage or variable-speed |
How It Works
Our Furnace Installation Process
From the first visit to your first tune-up, here is what to expect.
1. In-Home Consultation
We measure your home and check ductwork, venting, gas line and electrical to size the furnace correctly.
2. Options in Writing
Upfront pricing, efficiency ratings, Avista rebates and financing, so you can compare without pressure.
3. Installation Day
We protect your floors, haul away the old furnace and install the new one with its venting, drain and thermostat.
4. Testing and Startup
We check gas pressure, combustion, temperature rise, airflow and every safety control.
5. Walkthrough and Support
We show you the filter and thermostat, register your Carrier warranty and set up your first tune-up.
Pricing and Savings
How Much Does a New Furnace Cost in Spokane?
The price of a new furnace depends on its efficiency, whether it’s single-stage, two-stage or variable-speed, the size your home needs, and whether venting, ductwork, gas lines or electrical need updating.
We price every install upfront and in writing, so you’ll know the full cost before work starts. For a quick ballpark, use our instant quote.
Avista Rebate
High-Efficiency Gas Furnace
Idaho: $250 through Dec 31, 2026
Avista offers up to $650 in Washington on qualifying gas furnaces rated 90% AFUE or higher, passed through at purchase. The federal 25C tax credit for furnaces ended for systems installed after December 31, 2025.
WHAT SETS YOUR PRICE
- Furnace efficiency: 80% or 90%+ AFUE
- Single-stage, two-stage or variable-speed
- The size your home needs
- Venting, ductwork, gas or electrical updates
Financing: Replace now and pay over time. Ask about current plans when we give you your written options.
Rebates: Avista amounts can change. We’ll confirm what your furnace qualifies for before you buy.
Why Cline's
Why Spokane Homeowners Choose Cline's for Furnace Installation
We Fix First, Replace Last
If your furnace is worth repairing, we’ll tell you. When we recommend replacement, we’ll show you why.
Carrier Factory Authorized Dealer
Direct access to Carrier training, equipment and factory support, from Comfort to Infinity series furnaces.
Sized to Your Home
We size each furnace to your home’s actual heating needs, not just the label on the old unit.
Upfront, Written Pricing
Every option is priced in writing before work begins, with rebates and financing spelled out.
Clean, Respectful Installs
We protect your floors, haul away the old equipment and leave your utility room clean.
Licensed and Local
NATE-certified technicians, licensed in Washington (Lic. #CLINEAC76459), veteran-owned and based in Spokane Valley since 1988.
Recent Work
Recent Furnace Installations Around Spokane
Spokane Valley, WA
96% AFUE Gas Furnace
Replaced a 22-year-old 80% furnace with a two-stage high-efficiency model and new PVC venting.
Spokane, WA
Dual-Fuel Upgrade
Installed a gas furnace paired with a heat pump for efficient heating and summer cooling.
Post Falls, ID
New Construction Furnace
Sized and installed a high-efficiency furnace and thermostat for a new home.
Customer Stories
What Our Customers Say
Rated 4.9 on Google by 395+ customers. Spokane homeowners have trusted Cline’s since 1988.
Steven and the team from Cline’s were courteous and fast. They arrived when they said they would. We appreciate their professionalism.
October 3, 2026
The technician, Steven, was amazing.
October 2, 2026
Nate was very professional and knowledgeable. His ability was above that of his duration of service. As far as the company we will have to see as this was my… read more first service call, soo far better than other.
October 1, 2026
Service Area
Furnace Installation Across Spokane County and North Idaho
From our shop at 15916 E Sprague Ave in Spokane Valley, we install furnaces along the I-90 corridor from Spokane to Coeur d’Alene, and north to Mead, Colbert and Sandpoint.
Spokane County, WA: Spokane (South Hill, North Spokane, Five Mile, Indian Trail, Hillyard) · Spokane Valley (Greenacres, Opportunity, Veradale) · Liberty Lake · Mead · Colbert
Kootenai County, ID: Coeur d’Alene · Post Falls · Hayden
Bonner County, ID: Sandpoint
Spokane-area furnaces work hard from October through April, so we size every system for our winters. Not sure if we cover your address? Call 509-443-6146.
Questions
Furnace Installation FAQs for Spokane Homeowners
How much does furnace installation cost in Spokane?
It depends on the furnace's efficiency and staging, the size your home needs, and whether venting, ductwork, gas or electrical work is needed. Cline's gives you options with upfront, written pricing before any work begins. For a quick ballpark, use the instant quote on our website.
How long does furnace installation take?
Most straightforward replacements are finished in a day. Jobs that need new venting, ductwork changes or a switch to a different fuel can take longer. We'll give you the timeline with your written estimate.
What size furnace do I need?
It depends on your home's square footage, insulation, windows, ductwork and layout, not the size of your old furnace. We measure your home and calculate its heating needs so the new furnace isn't too big or too small.
Should I choose an 80% or a 90%+ AFUE furnace?
For most Spokane homes on natural gas, a 90%+ AFUE furnace pays off over our long heating season and qualifies for Avista incentives. An 80% furnace costs less up front and can make sense for rentals or homes where PVC venting isn't practical.
Are there rebates or tax credits for a new furnace in 2026?
Avista offers up to $650 in Washington on qualifying gas furnaces rated 90% AFUE or higher, and $250 in Idaho for furnaces installed by December 31, 2026. The federal 25C tax credit for furnaces ended for systems installed after December 31, 2025. We'll confirm what your furnace qualifies for.
Gas furnace, heat pump or dual fuel: which is best?
If you have natural gas, a high-efficiency gas furnace is a reliable choice for Spokane winters. A dual-fuel system adds a heat pump that heats efficiently on milder days and cools in summer. Homes without gas often pair an electric furnace with a heat pump.
How long does a new furnace last?
Most gas furnaces last about 15 to 20 years. Yearly maintenance, clean filters and a correct installation all help a furnace reach the long end of that range.
Do you offer financing on new furnaces?
Yes. Financing is available, and we'll go over current plans when we give you your written options.
Do you install furnaces in Coeur d'Alene and North Idaho?
Yes. We install furnaces in Coeur d'Alene, Post Falls, Hayden and Sandpoint, as well as Spokane, Spokane Valley, Liberty Lake, Mead and Colbert.
Related Services
Related Heating Services in Spokane
24/7 answering and same-day emergency repair, at the same rate after hours.
A yearly tune-up protects your new furnace and catches worn parts early.
Ready for a New Furnace?
Our “No Pressure Promise”: we fix first and replace last. If a repair is the right answer, that’s exactly what we’ll tell you. Get honest options, upfront pricing and a furnace sized for your home.
